It has taken me about 6 months to develop a full size felt figure and there have been plenty of problems to overcome along the way when upsizing from a 40cm tall figure to one that is 4 times bigger!
From these small figures…
…to this one – 164cm high
The problems I encountered were due to the scale of the figure and they began with the wire.
I tried heavy fencing wire however this just wasn’t strong enough to hold the figure up right one leg so I had a length of steel tubing bent to follow the line of the spine down to the toe of the standing leg and built the rest of the body around this structure.
The musculature was added beginning with a layer of knitted woollen strips to cover the wire to form a base for the wool fibres. I used Blue Faced Leicester wool, wet felted in layers, to build the shape of the body and a steamer and sander to aid with the felting and fulling.
The final layer or ‘skin’ was felted separately and then stitched onto the the figure.
As you can see from the variety of figures in this post I have made several more! I am now going to experiment with adding the colour and texture straight onto the figures to cut out the rather lengthy processes of making the felt skin, stitching it in place and fulling with steam and sander. So watch this space!